BRUSHCUTTER - CHIPPERS, GRINDERS AND SAWS
|
Vibration Can Kill
High levels of vibration can destroy bearings, cause hydraulic lines to leak or break and cause support bolts to come loose and back out plus it makes the operator very uncomfortable.
Unbalance
85% of high vibration problems in your cutting heads, tub grinders and saws are due to unbalance rotors. Unbalance increases with hours of service as the teeth and/or the rotor wear. Even after bearing replacement or changing the worn teeth the unbalance is still there.
The Solution
Field balancing will extend the life of your bearings and fix your problem with little down time. Shop balancing is another method, however the rotor is taking out the head and sent to a shop. This causes longer down time usually by days and generally cost more.
The Cost
Field balancing is as easy as getting your tires balance, but without taking the tire off the car. The cost of down time and repairs cause by unbalance can cost you thousands a year compared to about 2% to 7% of the cost of having us travel to any location your machine is working and balance your rotor in place.
We use state-of-the-art instruments to achieve a balance solution of where to add weight and how much. The weight is than welded to the rotor.
When your machine is shaking and you’re tired of replacing bearings with low hours.
Give Jack a call for a quote.
Toll Free: 1-877-373-9912 or 713-494-6663
Around the clock, Around the world.
|
We come to you.
| |
|
|
|
